Motherboard has issues:
1. If in the memory channels (G1, G2, G3, H1, H2, H3) (red rectangle on the second image) motherboard will not post. Error code 00.
If no memory installed in those slots everything is fine.
2. VGA connector is missing. See on 3rd picture at the bottom of the board red rectangle.
3. Fan latch is broken. (Top rectangle on the 3rd image)
All other memory slots are working fine and all PCIe slots are working fine and SATA ports are fine as well
Motherboard Supermicro: X9DR3-LN4F+ with remote access IPMI (Motherboard can be controlled remotely using regular network cable)
Form Factor: EE-ATX
Dimensions: 13.68" x 13" (34.7cm x 33cm) (Enhanced Extended ATX)
CPU: 2xE5-2689 up to 3.6GHz 8 cores (16 thread) each
RAM: 4 x 4GB DDR3 PC3-10600R Registered RDIMM ECC (double bit corrections)
Memory can be upgraded to:
32GB, 64GB, 128GB and so on. Up to 768GB.
Price for upgrade is 25$ per additional 16GB.
Network: 4x1Gb
I/O Shield is included.
Possible cooler options (at additional cost)
Dynatron: 2U R24 or 3U R27
Supermicro: 4U SNK-P0050AP4
Noctua: 4U NH-U9DX i4
Original Supermicro bios is not allowing to boot from NVMe SSD.
I modified bios which allow this board to boot from NVMe SSD.
Suitable for storage platform (TrueNAS, unRaid) due to cheap DDR3 memory.
ZFS file system likes memory and using it for caching.
System was stress tested with Memtest86+ and under Windows 10.
Every PCIe, memory slots (except of the broken ones) and SATA ports were tested.
Motherboard:
6 PCIe slots
14 SATA ports. 8 ports out of 14 can be SAS2 ports
18 working memory slots out of 24 total.
Located in Lindell Beach. On Mondays late morning early afternoon and morning on Wednesday in downtown Chilliwack, so can meet/deliver in Chilliwack during that time. Usually the First Wednesday or Thursday of the month traveling to Coquitlam, Richmond, Surrey, Burnaby, Vancouver. Can meet/deliver during a day in those cities.