Motherboard Supermicro: X9DR7-LN4F with remote access IPMI (Motherboard can be controlled remotely using regular network cable)
Form Factor: E-ATX
Dimensions: 12.1" x 13" (30.7 cm x 33.2 cm) (Extended ATX)
CPU: 2xE5-2696v2 up to 3.3GHz 12 cores (24 thread) each
RAM: 4 x 4GB DDR3 PC3-10600R Registered RDIMM ECC (double bit corrections)
Memory can be upgraded to:
32GB, 64GB, 128GB and so on. Up to 1024GB or 1TB
Price for upgrade is 25$ per additional 16GB.
Network: 4x1Gb
LSI 2308: Onboard LSI HBA was flashed to IT mode
Possible cooler options (at additional cost)
Dynatron: 2U R24 or 3U R27
Supermicro: 4U SNK-P0050AP4
Noctua: 4U NH-U9DX i4
Original Supermicro bios is not allowing to boot from NVMe SSD.
I modified bios which allow this board to boot from NVMe SSD.
Suitable for storage platform (TrueNAS, unRaid) due to cheap DDR3 memory.
ZFS file system likes memory and using it for caching.
System was stress tested with Memtest86+ and under Windows 10.
Every PCIe, memory slots and SATA ports were tested.
Motherboard:
6 PCIe slots
18 SATA ports. 8 ports out of 18 can be SAS2 ports
16 memory slots
Located in Lindell Beach. On Mondays late morning early afternoon and morning on Wednesday in downtown Chilliwack, so can meet/deliver in Chilliwack during that time. Usually the First Wednesday or Thursday of the month traveling to Coquitlam, Richmond, Surrey, Burnaby, Vancouver. Can meet/deliver during a day in those cities.